User manual

AT-620 User Manual
ATCOM TECHNOLOGY CO., LIMITED
Syslog server receives the messages from clients, and classifies them based on
priority and type. Then these messages will be written into log by some rules
which administrator can configure. This is a better way for log management.8
levels in debug information: Level 0---emergency: This is highest default debug
info level. You system can not work.
Level 1---alert: Your system has deadly problem.
Level 2---critical: Your system has serious problem.
Level 3---error: The error will affect your system working.
Level 4---warning: There are some potential dangers. But your system can
work.
Level 5---notice: Your system works well in special condition, but you need to
check its working environment and parameter.
Level 6---info: the daily debugging info.
Level 7---debug: the lowest debug info. Professional debugging info from R&D
person.
At present, the lowest level of debug information send to Syslog is info, debug
level only can be displayed on telnet.
The items describe:
9 Server IP： Syslog server IP address
9 Server Port：Syslog server port
9 MGR Log Level：config MGR log level
9 SIP Log Level：config SIPlog level
9 IAX2 Log Level：config IAX2log level
9 Enable Syslog：Enable/Disable Syslog