User manual

AT-620 User Manual
ATCOM TECHNOLOGY CO., LIMITED
9 Net mask: LAN net mask
9 DHCP Service: enable LAN DHCP Server , need to reboot to make it
available.
9 NAT: Network Address Translation
9 Bridge Mode: Select Bridge Mode or not: If you select Bridge Mode, the
phone will no longer set IP address for LAN physical port，LAN and WAN will
join in the same network. Click “Apply”, the phone will reboot.
3、 VoIP
3.1. SIP1
9 Register Status: SIP server registration status, if succeed display
Registered，or else display Unregistered.
9 Server Address: SIP server address , support both IP address and domain
name.
9 Server Port: SIP server port , default is 5060.
9 Account Name：SIP account name.
9 Phone Number： SIP account phone number, if leave it as blank , no
registration information will be sent out.
9 Display Name：Show the display name that you want to display on the phone
of callee. Support number and letter input.
9 Proxy Server Address：Normally the Proxy server is the same as SIP server.
If they are different then fill in the correct information that provided by ISP.
Proxy Server Port: Set your SIP server port.
Proxy Username: Input your SIP register account name.
Proxy Password: Input your SIP register password.
Domain Realm: config SIP local domain. If the server does not have special
requirements for the local domain of SIP terminal, the local domain can be the
same as SIP server domain. The user can also leave it as blank; the system will