Manualshelf

User manual

ManualsBrandsATCOM ManualsComputer equipmentAT-620
11121314151617181920
AT-620 User Manual
ATCOM TECHNOLOGY CO., LIMITED
1) B can press soft button “conf” to hold the call with A.
2) Then B inputs C’s number.
3) B presses Soft button “dial” to call to C.
4) C is on the call with B and A is on hold.
5) B presses Soft button “Spli” button to make 3-way conference call.
6) B presses soft button “spli” to end 3-way conference call and returns to the
call with A.
7) B presses soft button “exit” to end all the calls.
9、 Call History.
AT-620 supports 100 missed calls, incoming calls and dialed calls record. When
the storage is full, the latest call will update the history. When the phone reboots
or be out of power, all the call history will be cleared.
¾ Missed call
1) When the LCD screen displays “(number) Missed call(s)”, press soft button
“Miss”, then the screen shows “Missed Call”.
2) Press soft button “OK”, the phone displays missed call numbers.
3) Press navigation button to browse missed call history.
4) Choose the missed call record, press “OK” soft button to browse the specific
information of the record.
5) Press “Edai “soft button to revise the records and press soft button “dial” to
call this number.
¾ Incoming call
1) Press the menu button.
2) Press the navigation button to choose “call history” and then press OK
button.
3) Press the navigation button to choose “incoming call”, press soft button OK.
4) Press the navigation button to browse the incoming call record. If there is no
record, the LCD screen display “List is Empty”.
¾ Out coming call
Method 1,
1) Press “Menu”
2) Press up or down navigation key, and select call history and press soft
button “OK”
3) Select “Outgoing call” through “up” or “down” key, and press soft button
“OK”
4) Press up or down navigation button and check the received calls, LCD will
show “List is Empty”, if there is no received incoming call.
Method 2,
1) Press “soft button Clog” under standby status, entering outgoing call list.
2) Press up or down navigation button to read the received calls, LCD will
show “List is Empty”, if there is no received incoming call.