User manual

AT-620 User Manual
ATCOM TECHNOLOGY CO., LIMITED
E、Hand-free mode to handset
If you are phoning under hand-free mode and want to change to speaker
phone, juts pick up the handset without press any buttons.
2、 Make Call
A、Use the handset
Pickup the handset, the LCD will show the current lines (user could switch
between line1 and line2 by pressing the line button beside the LCD). User can
input the number with the keyboard and press # to send the number. When you
hear the tones of “du~~du~~” with dialed number showed on the LCD, the
called’s phone is ringing. If the called answer the call, the phone call is
established and the LCD will show the calling time and the called’s number.
B、Answer the phone under hand-free mode
Press the Speaker Phone button, the LCD will show the current lines (user
could switch between line1 and line2 by pressing the line button beside the LCD).
User can input the number with the keyboard and press # to send the number.
When caller hear the tones of “du~~du~~” with dialed number showed on the
LCD, the called’s phone is ringing. If the called answers the call, the phone call
is established, and the LCD will show the calling time and the called’s number.
C、Used phone book
a、 Pick up the handset.
b、 Press " Menu” button and use the "up" and "down" keys to enter
phonebook.
c、 Press "OK" to show the total amount in telephone.
d、 Press "OK" to enter the phone list and use "up" and "down" keys to find
the contact person.
e、 When you find the certain contact person, press" OK" to show the
details.
f、 Press "Edit" to edit the number or press" Dial" to call.
3、 Speed dial
It’s method for the phone in standby mode to dial number immediacy.
The method is as below：
A、Dial-up the number in standby mode
B、Push soft button “dail”, ”#”key or hang up directly to send the dial
number.
C、Push soft button to save the number in telephone directory.