User manual

AT820

AT820 Series

Series

Series User

User

User Manual

Manual

ATCOM TECHNOLOGY CO., LIMITED www.atcom.cn

exactly the given date. In that case, the <day> value must not be negative.

If<weekday >is not zero, then the daylight saving starts or ends on the

<weekday >on or after the given date if <day> is positive, or on or before the

given date if <day> is negative. If <day> is -1, it means the <weekday> on or

before the end-of-the-month (in other words the last occurrence of <weekday>

in that month).

Optional values inside [] are assumed to be 0 if they are not specified. Midnight

means 0:0:0 of the given date.

E.G. start=4/1/7/8:00:00;end=10/1/7/9:00:00;save=-1

Start time is 1st April, Sunday, 8:00:00 am.

End time is 1st October, Sunday, 9:00:00 am.

The display time will be 1 hour early than the standard time.

B. Manual

1. Set Local Date (YYYY/mm/dd): Manually set local date.

2. Set Local Time (HH:mm:ss): Manually set local time.

In manual mode, IP phone will resume to the manual time value after a reboot or

power off.

5.5.2

5.5.2 Line

Line

Set name for each line showed on LCD, if keep it as blank, it will use phone SIP account

user ID as short name. If set the two lines ’ account as the same account, both line can

make calls by using one account, but the other account is equal to be forbidden, and

it can answer incoming calls only with the first line.

5.5.3

5.5.3 Features

Features

5 .5.3.1

.5.3.1

.5.3.1 Speed

Speed

Speed Dial

Dial