User manual

AT820
AT820
AT820
AT820 Series
Series
Series
Series User
User
User
User Manual
Manual
Manual
Manual
20
ATCOM TECHNOLOGY CO., LIMITED www.atcom.cn
2. Press “ SMS ” soft key.
3. Press “ View ” to check the new SMS.
4. Press “ Reply ” to reply the SMS, or press “ Delete ” to delete this SMS.
5. Press “ Cancel ” to exit.
4.10 Access Mode
There are two kinds of web access mode for AT820 series: admin mode and user mode.
User could view and configure all items in admin mode, while user couldn ’ t change the
SIP configuration as well as server address and port but only access and view the
information. User would enter different mode after input different web address and
user name and password:
A. Administrator mode
Web address: the phone ’ s IP/index.asp.
User Name: admin.
Password: default password is none.
B. User mode
Web address: the phone ’ s IP/user.asp.
User Name: user.
Password: default password is none.
4.11 Move the cursor
If user wants to modify the content when inputting information on the phone, please
press navigation button “ Right ” at first, then user will see “ << ” soft key and “ >> ” soft
key. Use “ << ” to recede the cursor and “ >> ” to linefeed.
5
5
5
5 .
.
.
. Web
Web
Web
Web settings
settings
settings
settings
Input the phone ’ s IP addresses in the web browser and press “ Enter ” button, it will go
to the web interface of the user mode .Click on “ admin ” at right of the web page, user
can config the phone from the web then.