User manual

AT820
AT820
AT820
AT820 Series
Series
Series
Series User
User
User
User Manual
Manual
Manual
Manual
11
ATCOM TECHNOLOGY CO., LIMITED www.atcom.cn
1 .1 1 .2 W all position
A. Put the bottom side of the IP phone upside and push the plate with letter “ PUSH ”
into the slot, please refer the picture as below:
B. Push the other plate into the slot in accordance with the direction of the arrow.
C. Repeat A and B. It is the picture of wall mounting after fixing the two feet below:
D. Disassemble the feet way:
Press the plate with word “ PUSH ” and pull the feet with the direction of arrow. When
the plate is pull out of the slot (there will be a sound of “ pa ” ) user can take off the feet.
Attention: Please rotate the hook to the
position as in picture with a coin or other
tools