User manual

AT-323 IAX2 Phone User Manual (V1.43)
35
5. Usage of the phone
5.1 Receiving calls
AT-320 IP phone can receive incoming calls from other AT-320 IP phone
and devices that support the IAX2 protocol. It works just like an ordinary
phone for incoming calls. When it rings, you can receive the call by following
methods:
 Use handset: Lift the handset and begin speaking. When the call is
over, put the handset back.
 Handset to hand free: While receiving call with handset, press
on the keypad and then put down the handset. When the call is over,
press again.
 Hand free: Press to speak to the other party. When the call is
over, press again.
 Hand free to handset: While receiving the call with pressed
, pick up the handset to continue the call. When the call is over, put
back the handset.
Note When you communicate with the other party without lifting the handset, please
do not exceed 40 CM from speaker.
Speake
Speake
Speake
Speake
Speake
Keison Products www.keison.co.uk [e-mail] Tel: [phone]