User manual

AT-323 IAX2 Phone User Manual (V1.43)
33
4. Upgrade AT-320 IP phone
4.1 Use IE browse to upgrade the IP phone
Step 1: Fill the AT320’s IP in the IE browse (you can obtain AT320 IP
through the “Local IP” button of keypad)
Step 2:Use super password to access the AT320 setting page and
choose the debug caption to the item except “no output”.
Step 3:Click Upgrade firmware, select the correct program on the
upgrade program row and click upgrade to perform upgrade.
4.2 Use the PalmTool to upgrade the IP phone
1) setting IP address
Press the “Local IP” button get the phone’s IP address.
2) Choose the updating file
the updating file is .bin file , press upgrading the program , there come
out a new window ,and choose the corresponding updating file and
confirm it.
3) End of Upgrading.
During upgrading, the Palmtool shows the information of “ Updating …
please wait until the update led stops flashing ”. The updating will need
some time, after updating successfully; the LCD will show “ ready for call”.
At this point, the updating for IP phone is finished.
4.3 Use FTP to upgrade the phone
¾ Set FTP server
FTP server can be supplied by the server provider as well as setup by the
users in LAN. Please set the IP address of FTP server.
¾ Prepare Updated program
You can ask the server provider for the latest version of program
¾ Operation
If you have got the IP address of the FTP server from ISP, please do as
follows:
a) Use keypad to enter setting mode
b) Use keypad to input the IP address of FTP server
c) Press , then No19 light will blink twice a second. Once
the phone restarts successfully, the new program is effective.
8
Local
Keison Products www.keison.co.uk [e-mail] Tel: [phone]