User manual

AT-323 IAX2 Phone User Manual (V1.43)
29
set callwait X
Set whether to use call wait. X ranged from 0 to 1: 0: do not use call
wait; 1: use call wait.
set fwdnumber XXXXXXX
Set receiving forwarded calls phone number. XXXX must be an Arabic
numeral and no longer than 16 characters
set fwdalways X
Enable/disable forward all calls. X is ranged from 0 through 1. 0: do
not forward all calls; 1: forward all calls.
set fwdbusy X
Enable/disable forward calls if busy. X is ranged from 0 through 1. 0:
do not forward calls if busy; 1: forward call if busy.
set fwdnoanswer X
Enable/disable forward calls without replying. X is ranged from 0
through 1. 0: do not forward calls without replying; 1: forward call
without replying.
set answer X
Set the ring seconds before the phone answers the call auto or
forward the calls. X is ranged from 0 through 60.
set digitmap X
Set whether to use digitmap. X ranged from 0 to 1: 0: do not use
digitmap; 1: use digitmap.
set serviceaddr XXXX
Set IP address or domain name of asterisk server.
set registerttl X
Set register TTL. X is range from 10 through 65535 Sec. Default value
is 60 Sec.
set phonenumber XXXXXXXX
Set a local ID of AT-320 IP Phone. Value xxxxx must be an Arabic
numeral and no longer than 16 characters.
set account XXXXXX
Set the account; Value xxxxxx must be an Arabic numeral and no
longer than 32 characters.
set pin XXXXXXXXXX
Set the account; Value xxxxxx must be an Arabic numeral and no
longer than 32 characters.
set localport XXXX
Set the local port. Value XXXX default is 4569.
set dtmf X
Set DTMF relay type. X is ranged form 0 through 1: 0: Inband audio
1: outband audio.
set tos X
Set TOS segment of IP head package in RTP digital follow. X is range
Keison Products www.keison.co.uk [e-mail] Tel: [phone]