User manual

AT-323 IAX2 Phone User Manual (V1.43)
23
3.4 Telnet Configuration
● On the PC choose Start>Run, and then type telnet 192.168.1.100 into
Run field in popuping Run dialog. Or input telnet 192.168.1.100 in the
DOS window. Then the following information will be displayed.
PA168X V1.43 settings
Password :
Then please type password. With debug is set as 0[disable], if type ordinary
password (default one is 1234), after Retun, you will see
Password : ****
P:\>
If you type super password, then you will see:
Password : ********
P:\>
Above information indicates that IP phone is under setting mode, and then you
can set the AT-320 IP phone by using the telnet commands.
3.4.1 AT-320 Telnet Commands Explanation
AT-320 Telnet Commands
Command Function
?
Supply command name and parameters
get
Display basic parameters of AT-320 IP phone
set
Set parameters of AT-320 IP phone
store
Save current settings to designated position
load
Load designated settings to current position
exit
Exit from the setting mode without saving the configuration
write
Exit with saving all configurations and restart AT-320
ping
Ping other net parameter
ftp
The phone connects to FTP server and then get the files
Detail descrIPtion of AT-320 Telnet commands
¾ Command ?
Syntax descrIPtion: No optional parameter
Usage: Type command name and parameters following P:\> . Be used as
the keyword to supply keyword and parameters of the relevant
commands.
Keison Products www.keison.co.uk [e-mail] Tel: [phone]