User manual

AT-323 IAX2 Phone User Manual (V1.43)
20
parameters can be modified.
Fig 3.7 Setting Page using ordinary pin with Debug set as 0 [disable]
● Save Settings : Click this button to save the configuration and the phone
will reboot. Once the phone reboots successfully, the new configuration is
effective.
Note After entering set page, if save settings button is not clicked within 10 minutes,
then when you click it again, the index page asking for pin will pop up again. Then please
input the password again to enter the set page and then click save settings button to
confirm the modification.
● Address Book: Click this button to open the speed dial settings page.
Please refer to Fig 3.8. In this page, you can set and save the speed dial
number by typing the name into the Name field and then entering the
corresponding number following the name. For example, input Jack in
Name field following 001, and then input 5989426454 into Phone
number field. Then Jack’s number 5989426454 is saved in phone book.
Then please click Save/Back button. In normal state, you can use speed
dial to call numbers saved in phone book.
Keison Products www.keison.co.uk [e-mail] Tel: [phone]