User manual

www.atcom.cn
43/
4 FAQ
4.1 What is the user/password of my IP PBX?
The default IP and user/password of the IP PBX is:
IP-0X(IP01/02/04/08)
IP-BRIM
Default IP
192.168.1.100
192.168.1.100
Web login
admin/mysecret
admin/astfin
SSH/RS232 login
root/uClinux
or
root/12xerXes06
root/uClinux
4.2 Why there are two kind of firmware available for download?
There are two kinds of firmware:
Ext2 file: the file is requested when upgrade from BAPS base firmware to Astfin2 base
firmware. If your IPxx use the BAPS base firmware (old release model) and want to upgrade
the Astfin2 base firmware, you use the ext2 file and upgrade via the RS232 port.
md5 file: if you already use the Astfin2 firmware, you can upgrade the firmware via the GUI.
More info about how to upgrade please refer the user manual.
How to check if the device is BAPS base or ASTFIN2 base?
the BAPS base firmware support ipkg command in the OS and Astfin2 firmware doesn’t
support. You can use SSH to access to the firmware and run “ipkg update” to check if the ipkg
is supported.
The default firmware shipped by ATCOM is Astfin2 structure firmware.
4.3 How to upgrade via IP –PBX via RS232 console port?
For this procedure you'll need the following:
 A modem cable (direct RS232)
 A serial port on your PC
 A serial console client (eg. PuTTY for Windows or minicom for Linux)
 A TFTP server (eg. Tftpd32 for Windows)
 Internet access for the IP0x
 A basic understanding of hexadecimals
 A static free working environment or at least make sure you discharge all static
electricity from your body often during this process, before touching any
components
VoIPon www.voipon.co.uk [e-mail] Tel: [phone] Fax: [phone]