User manual

www.atcom.cn
41/
3) Enable the voicemail for users and put the corresponding Email Address.
3.8 Call Features
3.8.1 Call Pick Up
The default feature code to pick up a call is *8. If there is an incoming call for a user in the call
group 2, then the users in the pickup group 2 is able to pick up this call by dialing *8.
The pickup group and call group can be defined in the user setting page.
3.8.2 Call Park
The default call park extension is 700. The call park features code can be found in the file:
/etc/asterisk/features.conf
Park a call on eye-beam:
--Press XFER button , then it will shows Enter Number + press XFER
--Enter the default park extension 700 and press the XFER button again. The call will be parked to
the extension range 701~720
--dial 701~720 to get the parked call in another extension.
3.9 Cron
Cron is the name of program that enables Linux users to execute commands or scripts (groups of
commands) automatically at a specified time/date. It is normally used for sys admin commands,
like makewhatis, which builds a search database for the man -k command, or for running a backup
script, but can be used for anything.
You can start the cron service for IP04 by:
/etc/init.d/cron enable
/etc/init.d/cron start
The crontab file locats in /etc/config. More info for how to use cron in linux, please search in the
internet.
3.10 Backup and restore file
1 In the page “back up” to create new back up
2 You can restore this back up file to your computer
3 to transfer this back up file to another IPxx
VoIPon www.voipon.co.uk [e-mail] Tel: [phone] Fax: [phone]