User manual

www.atcom.cn
4/
1 Introduce
This Article
This article is the user manual for the IP-XX series products. It also includes the application
notes for how to use ATCOM products to build a telephony system for small office. Through
this article, we hope that users can build the IP telephony system via IP-XX series products.
The IP-XX series PBXs include IP01, IP02, IP04, IP08 and IPBRI so far, since
they have almost the same software and structure so we will use IP04 as the
demo unit on this article. Same method is available to the IP-XX series
products.
IP01, IP02 ,IP04, IP08 & IP-BRI
The IP-XX series PBXs are open source embedded IP PBX systems. They run uClinux and
Asterisk and support rich IP PBX features. They have big advantages on its inherent open
source software structure and ultra low power consumption ( <5 watt in idle state,
environment friendly).
Below are the difference between the IP01, IP04 and IP08 platform.
Model No.
RJ45
TEL Ports
RS232 Port
Others
Size(mm)
IP-01
1
1 x fxo/fxs
1 fix RS232 port
--
100 x 100 x 28
IP02
2
2 x fxo/fxs
1 RS232 module
--
100 x 100 x 28
IP-04
1
4 x fxo/fxs
1 RS232 module
MMC
225 x 120 x 30
IP-08
2
8 x fxo/fxs
1 RS232 module
MMC,USB
225 x 120 x 30
IP-BRI
1
4 x BRI TE
1 fix RS232 port
MMC
225 x 120 x 30
VoIPon www.voipon.co.uk [e-mail] Tel: [phone] Fax: [phone]