User manual

www.atcom.cn
31/
3.4 Make outbound calls to PSTN
There are many kinds of trunking you can use to make outgoing calls. It includes: Analog FXO
trunk, Digital E1/T1/BRI Trunk, SIP trunk, IAX trunk etc.
3.4.1 Analog/FXO trunking
For the IP01/04/08, you can install FXO module and use the FXO trunking to make outgoing
call via your local PSTN line. The set up is as per below:
Step 1: Create FXO trunk
Go to page Trunks--> Add New Analog Trunk
Note: The port1 and port2 of IP04 are slotted with FXO modules. Always click "Apply
Changes" in the right top corner when you do some changes.
Step 2: Create Outgoing Calling Rules
VoIPon www.voipon.co.uk [e-mail] Tel: [phone] Fax: [phone]