User manual

www.atcom.cn
27/
3.2 Different methods to access the IPxx
There are several ways to access the IPXX series products. Different ways has different usage.
The web/SSH/telnet accesses are base on network connection, and the console port access is
via the console cable which allows you to access the devices on a lower level.
 Web access
It is the most common way to access the IPxx. Most settings can be done through the web
interface. Simply put the device’s IP address in your web browser (better use Firefox) and
enter the username and password to access the device. The web access username/password
is admin/mysecret
 SSH access
This is the advance way to access the device, you can use the putty software to access the
device. in the ssh access, you can access the Linux directly and do more advance linux setting
and debug. The SSH user/password is root/uClinux
 Telnet access
The telnet access is similar with the SSH access but it is not suggested because it is not as
convenient as SSH access.
 Console access
The console access is used mainly for develope purpose or in the case when network is
down.
Below are the connections pictures for console access
For IP01 & IP02
For IP04
Below is the console port setting to access the IPXX
Running the Hyper Terminal or Minicom in your computer to connect the IP04, the setting of
the console port should be:
VoIPon www.voipon.co.uk [e-mail] Tel: [phone] Fax: [phone]