Cut Sheet

• Ideal for Lockout / Tagout

• Enhances NFPA 70E &

OSHA Compliance

• Reduces Arc Flash &

Electrocution Risk

• Detects Stored Energy

The UPA Voltage Alert reduces

the risk of electrical arc flash by

pre-verifying the electrical isola-

tion from outside of a electrical

panel. Hardwired to the circuit

breaker or main disconnect, the

UPA LED’s flash to indicate the

presence of hazardous condi-

tions (40-750 VAC & 30-1000

VDC) associated with stored

energy. Engineered with redun-

dant circuitry, the Voltage Alert

is powered by the same voltage

that it indicates. Available in 2

sizes, the easy to install UPA’s

fit through standard push-button

and conduit knockouts.

What you don’t know,

can shock you!

Voltage Alert

UPA130

a t c d i v e r s i f i e d . c o m

NFPA 70E Compliant

PAGE 1
UPA130 Voltage Alert What you don’t know, can shock you! The UPA Voltage Alert reduces • Ideal for Lockout / Tagout the risk of electrical arc flash by pre-verifying the electrical isolation from outside of a electrical • Enhances NFPA 70E & OSHA Compliance panel.
PAGE 2
UPA130 Voltage Alert • • • • APPLICATIONS Verification of Stored Energy Inside a Panel Fits 30mm Knockout Redundant Circuitry 40-750 VAC, 30-1000 VDC The UPA 130 reduces the risk of electrical arc flash by pre-verifying the electrical isolation from outside of a control panel. Hardwired to the circuit breaker or main disconnect, the UPA flashes whenever voltage is present. Engineered with redundant circuitry, the Voltage Alert is powered by the same voltage that it indicates.