User Manual: SCM25A Pro SCM50 SCM100 SCM110 SCM150 Active: SCM25A Pro . SCM50ASL . SCM100ASL . SCM110ASL . SCM150ASL . SCM50SL . SCM100SL . SCM110SL .
Safety Warnings SCM25/50/100/110/150 1. Read instructions – all the safety and operating instructions should be read before the appliance is operated. 2. Retain these instructions – the safety and operating instructions should be retained for future reference. 3. Heed warnings – all warnings on the appliance and in the operating instructions should be adhered to. 4. Follow instructions – all operating and other instructions should be followed. 5.
SCM25/ 25/50/100/ 50/100/110/ 110/150 150 SCM Introduction Welcome. In selecting ATC you have chosen an example of the finest audio engineering available. ATC was founded on a principle of engineering excellence, and that principle still defines our products today. Given the right opportunities, ATC products will deliver exceptional audio performance, but the opportunities will only arise from careful and thoughtful installation and use.
SCM25/50/100/110/150 1. Description 3. Monitor Placement The SCM25/50/100/110 and 150 are a range of three way The subjective performance of any monitor loudspeaker will be influenced by the loudspeakers. All of the range, excluding the SCM25 are acoustic character of the room in which it is used, and its position within the room. available as passive or active units, the SCM25 is only Most often monitors are installed in rooms which are comfortable to sit and talk in. available as an active unit.
SCM25/50/100/110/150 ASL monitors 6.Operation 5. Signal Cable Options Balanced cable configuration is the preferred option, Diagram 4 and 5 illustrate the connection and control panels for the Amplifiers however unbalanced connection is possible. Diagrams 2 and used in the active monitors. Each feature is described below. 3 illustrate the signal cable connections required for 5.1 Mains Inlet: The supplied mains power lead (appropriate to the local each option.
SCM25/50/100/110/150 Loudspeaker Positioning - 5.1 & 7.1 Surround SL Monitors 8.Connection centre rig left The monitors are equipped with a “tri-wire” connection ht sub panel to enable separate amplification of the bass driver 30° dis tan ce R 0° 11 30° 0° The terminals can accomadate either stripped cable ends 150° 150° or 4mm plugs: Always use good quality speaker cable with 11 L ce tan dis the three pairs of terminals if you wish to take advantage of the tri-wire facility.
SCM25/50/100/110/150 Diagram 4 - SCM25A Pro connection and control panel Input sensitivity (full output) bass boost +3dB Designed and manufactured by Acoustic Transducer Company Gloucestershire GL6 8HR England 1v/2.2dBu (ref.) 2v/8.2dBu 0dB (ref.) R Tri - AmpPack High Performance Active Loudspeaker Laite on liitettävä suojakoskettimilla varustettuun pistorasiaan Apparatet må tilkoples jordet stikkontakt Apparaten skall anslutas till jordat uttag 115/220 - 230 V fuse: 115V :T6.
SCM25/50/100/110/150 Specifications ASL Monitors Drivers: HF MF LF SCM25A Pro SCM50ASL SCM100ASL SCM110ASL SCM150ASL 25mm (1") 75mm (3") 164mm (7") 25mm (1") 75mm (3") 234mm (9") 25mm (1") 75mm (3") 314mm (12") 25mm (1") 75mm (3") 314mm (12") 25mm (1") 75mm (3") 375mm (15") 65Hz - 12kHz 60Hz - 12kHz 74Hz – 17kHz 70Hz – 12kHz 65Hz - 12kHz Cut-off Frequencies (-6dB free standing) 47Hz & 22kHz 38Hz & 20kHz 32Hz & 20kHz 32Hz & 20kHz 25Hz & 20kHz Matched Response ±0.5dB ±0.5dB ±0.
SCM25/50/100/110/150 10. Care and Maintenance High technology material finishes are used in this product.The surfaces are durable and with a little care can be kept as good as new even under conditions of heavy use. Normally a dry duster will be all that is required to keep the finishes clean. Heavy soiling can be cleaned using a cloth slightly moistened with a non-abrasive household cleaner.
® AC O U S T I C ENGINEERS Loudspeaker Technology Ltd, Gypsy Lane, Aston Down, Stroud, Gloucestershire GL6 8HR United Kingdom Telephone 01285 760561 Fax 01285 760683 Email: info@atc.gb.net Website: www.atc.gb.
