User manual

Specifications
SCM50/100/150SL
8
Specifications comply with the following standards:Australian Standard Specification No 1127 "Sound System Loudspeakers" Part 5,
IEFE Specification Standard No 219-1975
ATC reserves the right to vary products and specifications without prior notice.Acoustic Transducer Co. is a trading name and ATC
is the registered trade mark of Loudspeaker Technology Ltd.
Drivers:
HF 25mm (1") 25mm (1") 25mm (1")
MF 75mm (3") 75mm (3") 75mm (3")
LF 234mm (9") 314mm (12") 375mm (15")
Amplitude Linearity ±2dB 70Hz – 12kHz 65Hz – 12kHz 60Hz – 12kHz
Cut-off Frequencies
(-6dB free standing) 38Hz & 20kHz 32Hz & 20kHz 25Hz & 20kHz
Matched Response ±0.5dB ±0.5dB ±0.5dB
Dispersion:
Horizontal ±80° Coherent ±80° Coherent ±80° Coherent
Vertical ±10° Coherent ±10° Coherent ±10° Coherent
Max Continuous SPL 112dB SPL @ 1 metre 115dB SPL @ 1 metre 117dB SPL @ 1 metre
Crossover Frequency 380Hz and 3.5kHz 380Hz and 3.5kHz 380Hz and 3.5kHz
Input Connector All products: Binding Posts/4mm Sockets (Tri-Wire capable)
Sensitivity 85dB @1 Watt @ 1 metre 88dB @1 Watt @ 1 metre 90dB @1 Watt @ 1 metre
Nominal Impedance 8 Ohms 8 Ohms 8 Ohms
Recommended Power 100 - 1500 Watts 100 - 1500 Watts 100 - 1500 Watts
Amplifier:
Cabinet Dimensions (HxWxD) 717 x 304 x 425mm 834 x 400 x 530mm 884 x 498 x 513mm
Overall Weight 41.1kg (90.5lb) 57.0kg (126.5lb) 67.2kg (148.1lb)
Stands/Brackets Hi-Fi products only: Floor stands included.
Cabinet Finishes All products: Standard real wood veneers are available in Black Ash, Mahogany, Cherry and Natural Oak.
Other veneers and finishes can be supplied to special order.
SCM50SL SCM100SL SCM150SL