Specifications

Copyright (C) ATBS Technology 版權所有請勿翻印
5. Specification
5.1 MS33 Sensor
Model
MS33
Operation
Temperature
-40℃~ 125℃
Operation
Humidity
0 ~ 100%
Total
Length
72±0. 2mm
Total Height
12.4±0. 2mm
Weight
27g (±0.5g)
Battery
lifespan
Around 36 months
Battery size
CR2050W for TPMS spec
Monitoring
pressure
0 ~ 900kpa ±7Kpa ( 0-130psi ±1Psi)
Monitoring
temperature
-20℃~85℃ ±1℃
Frequency
2.4GHz
Others
Continuously transmits 10 records when tire
pressure change rapidly; When a tire stops,
it transmits every 148-152 seconds. If not, it
transmits every 28-32 seconds.
Federal Communication Commission
Interference Statement
This equipment has been tested and found to comply
with the limits for a Class B
digital device, pursuant to Part 15 of the FCC Rules.
These limits are designed to
provide reasonable protection against harmful
interference in a residential installation.
This equipment generates, uses and can radiate radio
frequency energy and, if not
installed and used in accordance with the
instructions, may cause harmful interference
to radio communications. However, there is no
guarantee that interference will not
occur in a particular installation. If this equipment
does cause harmful interference to
radio or television reception, which can be
determined by turning the equipment off
and on, the user is encouraged to try to correct the
interference by one of the
following measures:
. Reorient or relocate the receiving antenna.
. Increase the separation between the equipment and
receiver.
. Connect the equipment into an outlet on a circuit
different from that to which the
receiver is connected.
. Consult the dealer or an experienced radio/TV
technician for help.
FCC Caution: To assure continued compliance, any
changes or modifications not
expressly approved by the party responsible for
compliance could void the user's
authority to operate this equipment. (Example - use
only shielded interface cables
when connecting to computer or peripheral devices).
This device complies with Part 15 of the FCC Rules.
Operation is subject to the
following two conditions:
(1) This device may not cause harmful interference,
and (2) This device must accept
any interference received, including interference that
may cause undesired operation.
Radiation Exposure Statement:
The device has been evaluated to meet general RF exposure
requirement, The device can be used in portable
exposure
condition without restriction.