User's Manual

Step 5. Enter the right rear wheel’s ID.

Step 6. Enter the left rear wheel’s ID.

Step 7. After entering all sensor’s ID, click SAVE and click

YES.

Step 8. Go back to ID Learning page, when it shows

green values (tire pressure condition) under the ID, click

SAVE and click YES to save it, the receiver will flash 1

time, it means the ID is saved into the receiver.

Go back to TPMS page to see the tire condition, and it’s

done.

4.3.3 Method 3: (this method is suitable for changing the

wheel order.)

Step 1. Go to ID Learnig page and click QR.

Step 2. Enter into ID Read page, and click the blank to

start scanning QR code.