User's Manual

4.1 Install App

4.1-1 Download the APP: iTPMS from Apple Store/

Google Play.

4.1-2 Go to Setting  General  Bluetooth Page.

4.1-3 Turn on the Bluetooth, and search the device.

4.1-4 Find iTPMS device and pair with it. The name of

device is BT6800 XXXXXX (X=0-9)

4.1-5 Click Allow to start iTPMS APP.

4.1-5 Choose the vehicle and then user is allowed to read

tire condition from the App.

Note: Four sensors was set by the manufacturer, there’s

no need to pair the sensors again. (If there are requests to

change new sensors or to change the wheel order please

follow the instruction: sensor ID learning.)

4.2 iTPMSystem alert and setting instruction:

4.2-1 Enter Setup page, users can set up the unit and limit

of tire pressure and temperature.

Go back to main page to save the setting.

After finishing the setting and go back to main page, the

receiver will flash 1 time, it means the setting is already

saved into the receiver. When downloading a new iTPMS,

make sure to set up the unit, tire pressure and tire

temperature limit, and go back to main page and save it.

4.2-2 iTPMSystem App alert description:

Go to the setting page and users are allowed to set tire

pressure and temperature limit. (Please refer to the

vehicle’s tire pressure label, we suggest to set the lower

limit to 80% of the normal value.)

Tire pressure is too high and it’s over the

limit.

No pressure.

Tire pressure is too low and it’s under the

limit.

Tire temperature is over the limit.

Sensor’s battery voltage is too low.

Tire condition is abnormal.