User's Manual

ManualsBrandsATBS Technology ManualsElectronicsTPMS for iPod,iPhone,iPad

(3) to check whether the installation is correct.

Note: The mini USB socket in the back is for power only,

there’s no data communication function.

3.2 Install A-Type External Sensor (Battery

replaceable):

3.2.1 Each sensor’s label has been marked its ID and its

wheel order.

EX:

Sensor’s Model. No.:

AT67

Wheel Order: 01:L1

ID: 3C0886B5

3.2.2 Place the battery into the sensor and screw the top

cap onto the sensor. Please follow the battery’s polarity to

place the battery. Upside is +, downside is -.

3.2.2 Remove the original valve cap from the tire.

3.2.3 Screw lock nut first (1) and will become (2). Screw

the sensor onto valve stem clockwise (3). Screw (1)

lock nut back and use the wrench to lock tightly (4).

(3)(4) steps can make sure the sensor’s fixity and is

provided with anti-theft function.

Note

：

(1) Beware of the conductivity between the sensor

and the valve stem.

(2) Sensors are supposed to be well locked onto the

valve stem to avoid from leaking.

(3) Please replace sensor’s battery once its voltage

is under 2.6v.

(4) If driver drives on a lumpy road, or the tire

pressure changes rapidly, our device will deem

this as a danger situation, and the device will

alert the driver continuously by sending 10

data, in this condition, the battery will ran out

fast.

3.3 Install M-Type Internal Sensor :

3.3.1 Each sensor’s label has been marked its ID

and its wheel order.

3.3.2 Tire location

3.4 Install Internal Sensor (M-type)

3.4.1 Remove the tires from vehicles.

3.4.2 Deflate the tires and detach rim and tire.

3.4.3 Install sensor on rim to appropriate position.

3.4.4 Balance wheels.

3.4.5 Install wheel to appropriate position.

4. iTPMS APP Installation:

iTPMS App is for free. Through the App, you can know tire

temperature and pressure, battery voltage of each sensor,

and each sensor’s ID.

01: Left Front (L1) 02: Right Front (R1)

04: Left Rear (L2) 03: Right Rear (R2)

Model