User Manual

Copyright (C) ATBS Technology Co. R2.0 版權所有請勿翻印
3.2.3 Remove original valve cap and screw (1) lock nut
first then (2) sensor onto valve stem.
3.2.4 Screw (1) lock nut back and using (3) Wrenches to
lock tight. This two steps lock procedure can
effectively prevents sensor from easy removing also
in favor of sensor stationary.
Note: User may ignore this fixture, when causing
inflation hassle concerns.
3.2.5 Continue to install all other sensors with the same
procedure.
Note
：
：：
：
(1) Clean up the valve stem surface before
installation to ensure the conductivity between
sensor and valve.
(2) Sensor shall be tight lock at valve steam to
avoid leak.
(3) Please replace sensor battery in case voltage is
low less than 2.7v.
4. Install iTPMS APP:
The ITPMS is free download. Trough the iTPMS you can
know tires’ temperature, pressure, battery voltage and the
tire sensors’ ID.
Step1: Download the APP from Apple Store.
Step2: Pairing iTPMS to iPod, iPhone, iPad
as follow:
4.2-1 Go to Setting  General  Bluetooth Page.
4.2-2 Turn on the Bluetooth, and it will scan the devices
automatically.
4.2-3 Find iTPMS device and pair it.
Step3: Run the “ iTPMS “ installed on iPod touch, iPhone,
and iPad to know your tires’ status in real time.
5. Specification
5.1 BT6000i receiver :
Operation Voltage USB 5V
Operation Current 50 mA
Operation
Temperature
-10~ 70 ℃
TPMS Frequency 433.92 MHz
BT Frequency 2.4 GHz
5.2 AT68 Sensor:
Operation
Temperature
-40 °C to 125 ± 1°C
Operating Humidity 100%
Frequency 433.92MHz
Monitoring
Pressure
0~65± 1 PSI
Battery 3.0 V
Weight 8.5g
Battery Lifespan About 12 months
6. NOTE and CAUTION：
6.1 No chemical allowed for clearing.
6.2 Do not place the unit at the dusty place. It could cause
malfunction.
6.3 Connect the power plug securely. Improper
connection will cause over current and may result in
malfunction.
6.4
Do not remove cover, or modify the product. Contact
your local dealer to perform servicing such as
inspection, adjustment, or repair work.
6.5 This product prevents moisture, but not 100%
waterproof; do not soak it in water
6.6 The product warranty for one year, please correctly
use the product, due to natural and man-made
disasters, drops, soak water, smolder, non-normal
power supply and other damage caused, not within
the warranty.