User's Manual

Copyright (C) ATBS Technology Co. R4.5e
Note : Each sensor has its ID set by manufacturer.
4.2-1 Tap More following with Learning Sensor ID and
sign up sensor’s ID.
4.2-2 Place the battery correctly.When the sensor detects
the change of pressure,ID will turn red to alert users.
4.2-3 On Setup page, you can set up the pressure and the
temperature of the unit.
5. Specification
5.1 BT6000C receiver:
Operation Voltage
9~24V
Operation Current
50 mA
Operation
Temperature
-10~ 70 ℃
TPMS Frequency
433.92 MHz
BT Frequency
3.0SPP
5.2 Sensor:
Operation
Temperature
-40 °C to 125 ± 1°C
Operating
Humidity
100%
Frequency
433.92MHz
Monitoring
Pressure
0~132 psi
Battery
2.9 V ± 0.1V
Weight
A-type
9.0g ± 0.2g
M-type
27g ± 0.5g
Battery Lifespan
A-type
About 8~12
months
M-type
5 years
6. Caution：
6.1 Information provided in user’s guide is for reference
only. You could operate the device only when your
vehicle stops.
6.2 This equipment may lead to malfunction due to some
harmful interference systems.
6.3 Four sensors’ IDs of this product have already set by
the manufacturer. If you would like to replace new
sensors, please seek the agent for assistance.
6.4 Do not soak our product or sensor in the water or
chemical. Chemicals are not allowed to clean.
6.5 Do not replace the rubber gasket arbitrarily. If there is
any failure, please replace it with certified product.
6.6 The warranty of the product lasts for one year, please
use the product correctly. The warranty excludes natural
and artificial disasters, drops, soaking in water accident,
fire accident, anomalistic power supply and other
damage.
6.7 The warranty won’t cover any consumptive
accessories like: the packaging, Velcro, manual, etc.
6.8 Please refer to the steps from user’s guide to avoid
any abnormal operation. It may lead to malfunction.
6.9 Any changes or modifications in construction of this
device which are not expressly approved by the party