User's Manual

3.3.2 Tire location

3.3.3

3.3.3 Install Internal Sensor (M-type)

i. Remove the tires from vehicles.

ii. Deflate the tires and detach rim and tire.

iii. Install sensor on rim to appropriate position.

iv. Balance wheels.

v. Install wheel to appropriate position of

vehicle.

4. iTPMS APP Installation:

iTPMS App is for free. Trough the iTPMS you can know

temperature and pressure, battery voltage of the tires of

each sensor’s ID.

4.1 Install App

Note : Each sensor has its ID set by manufacturer.

4.1-1 Download the APP: TPMS from Apple Store.

4.1-2 Go to Setting  General  Bluetooth Page.

4.1-3 Turn on the Bluetooth, and it will scan the devices

automatically.

4.1-4 Find iTPMS device and pair it.The name of device is

iTPMS XXXXXX (X=0-9)

4.1-5 As pairing works, you could sign up sensor’s ID on

iPod, iPhone and iPad.

4.1-6 Install the battery, and set the sensor’s ID. When the

setting works, you would see the tire pressure.

4.2 Operate APP

01: Left Front (L1/LF) 02: Right Front(R1/RF)

04: Left Rear (L2/LR) 03: Right Rear(R2/RR)