Instruction Manual

Rifle assembly order

Fig. 2 – Rifle assembly order.

1 – receiver assembled; 2 – tank; 3 – barrel with silencer; 4 – barrel

attachment screws; 5 – stock; 6 – stock attachment screws; 7 –

stock attachment screws; 8 – cheekpad; 9 – cheekpad adjustment

screw; 10 – cheekpad pin; 11 – cheekpad axis; 12 – magazine; 13 –

safety.

• Mount the tank to the assembled receiver;

• Mount the barrel (see “Barrel mounting and dismounting”

paragraph);

• Tighten the stock to the rail using screws 6 and nut 7;

• Mount the cheekpad using pin 10, axis 11 and screw 9;

• Cock the bolt and install the safety (fig. 3).