User's Manual

威立达数码科技（深圳）有限公司
ATAKE DIGITAL TECHNOLOGY SHENZHEN CO.LTD
MA-RD-202
Edition
Audio Specification
V1.0
3
1. Connect the micro USB charging cable (included) to the charging port of the
speaker and insert the other end into a port on your computer or similar suitable
power source.
2. The red LED turns ON, indicating that the battery is being charged.Once it is
fully charged, the red LED will turn OFF. If you have not used the speaker for a
long time, please fully charge before use. We recommend charging the battery once
a month to extend battery life.
4.2 Turn On/Off the Speaker AND LIGHTS
1. Switch the speaker to ON1. The power turns ON and the spikes light up blue.
2. Switch the speaker to ON2. The power turns ON and the both the spikes and the
skull will light up.
3. To turn the speaker OFF, slide the “ON/OFF” switch to the OFF position.
4.3 PAIRING
Your Bluetooth® Speaker can wirelessly stream audio from any Bluetooth® enabled
device within 27-33 Feet. Simply follow the steps below.
1. Turn the speaker ON.
2. You will hear two beeps and the blue LED will flash indicating that the speaker
is in pairing mode.
3. Turn ON the Bluetooth® on your device and select “Gadget 8067044”from the list
of found devices. Note, if the speaker has been previously paired with a different
Bluetooth® device it will not appear in the list of found devices. You will need
to disconnect the other device and search again.
4. If required, enter the password “0000”.
5. Once paired successfully, you will hear a beep and the LED will remain solid
blue.
6. If you fail to pair your device or you want to pair it with a new device please
repeat the steps outlined above.