User manual

Control panel
1 Programme selection buttons
2 Half load button
3 Delay start button
4 Indicator lights
5 On/Off button
6 Function buttons
Indicator lights
Salt Comes on when the special salt has run out.
Rinse aid Comes on when the rinse aid has run out.
End Comes on when a washing programme has
ended. It also has added functions of visual sig-
nalling as:
– the setting of the water softener,
– activation/deactivation of the audible signals,
– intervention of an alarm due to the malfunction
of the machine.
Half load button
This option is useful and economical when
baskets are not fully loaded. It reduces the
consumption of water and energy.
Load both baskets.
When using this option reduce the dose of
detergent that is normally used for a com-
plete load.
This option is not selectable with all pro-
grammes. (Refer to 'Washing pro-
grammes').
Function buttons
The following functions can be set using
these buttons:
• setting the water softener level,
• cancelling a washing programme or a de-
lay start in progress,
• activation/deactivation of the audible sig-
nals.
Setting mode
Press the On/Off button. If ALL programme
button lights come on the appliance is in set-
ting mode.
Always remember that when performing
the following operations:
– selecting a washing programme,
– setting the water softener level,
– activating/deactivating the audible
signals,
the appliance MUST be in setting mode.
4