User manual

• The indicators , ,
and are off.
• The indicator still flashes.
• The display shows the current
setting: = Acoustic signal off.
3. Press to change the setting.
= Acoustic signal on.
4. Press on/off to confirm the setting.
AirDry
AirDry improves the drying results with
less energy consumption.
While the drying phase
operates, a device opens the
appliance door. The door is
then kept ajar.
CAUTION! Do not try to close
the appliance door within 2
minutes after automatic open.
This can cause damage to the
appliance.
CAUTION! In case of presence
of children, the AirDry system
can be deactivated if you want
to keep the door closed in the
end of the cycle.
AirDry is automatically activated with all
programmes excluding Rinse Hold
To improve the drying performance refer
to the Extra Dry option or activate AirDry.
How to deactivate AirDry
The appliance must be in programme
selection mode.
1. To enter the user mode, press and
hold simultaneously and
until the indicators , , ,
and start flashing and the
display is blank.
2. Press
.
• The indicators , ,
and are off.
• The indicator still flashes.
• The display shows the current
setting: = AirDry activated.
3. Press to change the setting: =
AirDry deactivated.
4. Press on/off to confirm the setting.
OPTIONS
Desired options must be
activated every time before you
start a programme.
It is not possible to activate or
deactivate options while a
programme is running.
Not all options are compatible
with each other. If you have
selected non compatible
options, the appliance will
automatically deactivate one or
more of them. Only the
indicators of the options still
active will stay on.
10