User manual

Control panel
1 On/Off button
2 Digital display
3 Delay start button
4 Programme selection buttons
5 Indicator lights
6 Function buttons
Indicator lights
Salt Comes on when the special salt has run out.
Rinse aid Comes on when the rinse aid has run out.
End Comes on when a washing programme has
ended.
It also has added functions of visual signalling as:
• the setting of the water softener,
• activation/deactivation of the audible signals,
• intervention of an alarm due to the malfunction
of the machine.
The digital display
The digital display indicates:
• the level of hardness to which the water
softener is set,
• the approximate remaining time of the run-
ning programme,
• the end of a washing programme (zero will
appear in the digital display),
• the countdown for the delay start,
• fault codes concerning malfunction of the
dishwasher,
• if the audible signals are activated/deacti-
vated.
Function buttons (A, B and C)
The following functions can be set using
these buttons:
• setting the water softener level,
• cancelling a washing programme or a de-
lay start in progress,
• activation/deactivation of the audible sig-
nals.
Setting mode
Press the On/Off button; if ALL programme
button lights come on the appliance is in set-
ting mode.
Always remember that when performing
the following operations:
– selecting a washing programme,
– setting the water softener level,
– activating/deactivating the audible
signals,
the appliance MUST be in setting mode.
4