User manual

Removing the glass panels
A
1. Press the buttons at the sides of the
door trim (A) on the upper cover and
pull it upwards to remove it.
B
2. Hold the inner glass B tightly with both
hands and slide it upwards to remove it
from its initial position. Do the same
with the second glass panel.
Caution! Make sure that you tightly
hold the glasses to prevent them from
falling.
Clean the door with a wet sponge and rub
it dry with a soft cloth. Do not use steel
wool, acids or abrasive cleaning agents be-
cause they can damage the surface.
Installing the glass panels
When the oven door is clean, install the
glass panels in the opposite sequence. The
middle glass panel has a small dot on the
top and the second one has screen print-
ings. Make sure that you put the middle
glass panel in the correct seats.
The screen-printing zone must face the in-
ner side of the door. Make sure that after
the installation the surface of the glass pan-
el frame is not rough when you touch it.
WHAT TO DO IF…
Warning! Refer to the Safety chapters.
16