User manual

ATAG 51
Automatic turn on/ off
The time the oven is to cook for and the time it is
to finish can be programmed in advance.
1. Prepare the food and put it in the oven. Set
the operating mode and temperature using the
application table.
2. Press the SELECT button repeatedly until
the Cooking time LED flashes.
Then immediately set the required cooking time (in
hours and minutes) with the or button.
3. Press the SELECT button repeatedly until
the End time LED flashes.
Then immediately set the time it is to switch off with
the or button.
4. The programming takes effect 5 seconds after
setting, the two LED’s on the left (cooking time and
end time) light up and the time is displayed.
5. The oven switches on at the programmed time
and switches off again later. When the food is cooked
and the oven has switched off, the cooking time and
end time LED’s flash and “0.00” appears.
6. Take the food out and switch off the two
oven knobs (oven thermostat and oven function
control knobs).
7. Press any button to activate the oven.
Correcting
Select the relevant function with the SELECT button
: corrections can be made when the relevant LED
flashes.
Cancelling
Press the time button repeatedly until the Cooking
time LED flashes. Then immediately set “0.00”
with the button. The time is displayed after
5 seconds.
Note
The automatic feature should only be used with dishes
and food that do not need stirring or watching when
cooking.