Operation Manual

EN 22
The timer function The kitchen timer function
The timer cannot be linked to a
cooking zone.
The kitchen timer can be linked to
a cooking zone. This means the
cooking zone switches off if the
set time has passed.
When the timer/kitchen timer
button is pressed, the timer
function automatically switches
on after 3 seconds if you do
nothing.
The kitchen timer function can be
reached from the timer function
by pressing the + or - button.
Note
• There’s one timer/kitchen timer available per cooking zone.
• The timer-/kitchen timer function can also be used without
activating an accompanying cooking zone.
Switching on the timer
• Press the timer/kitchen timer button once.
The display of the timer lights up and you’ll see three zeroes
flashing. + and - appears below.
• If you do not set any time with the + or - button the timer will run
automatically after 3 seconds. The timer can go as far as 9 hours
and 59 minutes.
The red upwards arrow lights up and the time increases.
• Press the timer/kitchen timer button again button to switch it off.
Switching on the kitchen timer
• Press the timer/kitchen timer button of the cooking zone once.
• Press the + or -button to switch from the timer function to the
kitchen timer function. After that you can set the desired cooking
time with the + button. Then you can change the set time with the
- button.
The red upwards arrow lights up. The time counts down.
• Press the timer/kitchen timer button again to switch it off.
Note
• The kitchen timer is linked to the cooking zone if the accompanying
cooking zone is switched on.
• If the kitchen timer is linked to a cooking zone, the cooking zone
will switch off after the set time has passed.
OPERATION