Operation Manual

EN 18
Symptom Possible cause Solution
A fuse blows as soon as the
hob is switched on.
The appliance is incorrectly
connected.
Check the electrical
connections.
Error code ER03. The control panel is dirty or
has water on it.
Clean the control panel.
Error code E3. Unsuitable pan used. Use a pan suitable for
induction cooking.
Error code E2. Appliance overheated. The appliance has been
switched off because of
overheating.
Fault code E6. The appliance has been
connected incorrectly and/or
the mains voltage is too high.
Have your connection
changed.
Other error codes. Defective generator. Contact your service centre.
FAULTS