Operation Manual

GB 24
INSTALLATION INSTRUCTIONS
Preparing the hob
Fit the elbow supplied on the appliance’s gas connection.
1/2” ISO 228 (straight)
1/2” ISO 10226-1 (conical)
Sealing ring
Only for France:
1/2” ISO 228 (straight)
1/2” ISO 228 (straight)
Sealing ring
Cut opening in worktop
Saw the opening in the worktop. is should be done very •
accurately (see building in dimensions).
If the woodtop is made of treated wood, then coat the sawn •
surfaces of the top with sealing varnish, to prevent moisture
causing the top to swell.
Building in