Operation Manual

GB 22
INSTALLATION INSTRUCTIONS
is appliance should only be connected up by a registered installer!
Caution!
e type of gas and the country for which the appliance has been
designed are indicated on the application identification card.
is is a category 3 appliance.
Gas connection
e gas connection must comply with national and local •
regulations.
We recommend that the hob be connected by means of a fixed •
pipe. Connection using a specially designed safety hose is also
permitted.
Behind an oven use must be made of a pipe made entirely out of •
metal.
Warning!
A safety hose may not be bent and must not come into contact •
with moving parts of kitchen units.
In all cases the connection tap for the appliance must be •
positioned such that it is easily accessible.
Before using the appliance for the first time check the •
connections using water and washing-up liquid to ensure that
there are no gas leaks.
Electrical connection
230V - 50Hz - 1.1 VA (for ..B appliances)
230V - 50Hz - 5.1 VA (for ..C appliances)
e electrical connection must comply with national and local •
regulations.
Wall socket and plug must be accessible at all times. •
If you want to make a fixed connection, ensure that a multi-pole •
switch with a distance between contacts of 3 mm is installed in
the supply cable.
General