User manual

9
Mounting and Removing
Fastening Plates
The appliance can be placed in a 270 x
490 mm opening in a kitchen work
surface. If there is not enough room for
the fastening plates on the side of the
deep-fryer, the screws holding them in
place first have to be loosened and the
plates removed.
Put the appliance in place, but lift it
sufficiently to replace the fastening
plates.
Again fasten the screws through the
elongated holes in the plates. Let the
appliance slip down and tighten the
fastening screws in the plate.
12
Overheating Protection
If the oil in the deep-fryer pan
overheats, the built-in overheating
protection system will turn the
appliance off. Please consult the
service department to solve this
problem.
Stainless steel deep-fryer lid
Placing the lid on the deep-fryer pan
during use will decrease heating time.