User manual

7
The safety plate is removed for
draining oil by pushing it to the side
and pulling down. Then the tap can be
turned to the vertical position for
draining oil.
Important: Always replace the safety
plate after draining oil.
Caution! The oil should only be
drained after it has cooled. A suitable
container for containing the oil is
required for draining. After the deep-
fryer pan is emptied, the tap must
again be closed and the handle
removed.
Always make sure to thoroughly clean
the deep-fryer after use, as old, spilled
food remnants in the deep-fryer can
obstruct the drain opening.
Cleaning
Close the tap and wash the pan with
water containing a small amount of
dish detergent. Place a bucket under
the tap and drain the pan.
Draining Oil
Closed
Open
14
If The Appliance Does Not Work Right
Check the fuses in the meter cupboard.
Check to make sure that no circuit
breakers have been tripped.
If the heating thermostat has been
turned off, the reset button must be
pushed.
Restrictive clauses
The guarantee does not cover any
errors or damages resulting from
manufacturing and material defects.
One guarantee condition is that only a
service department approved by us is
allowed to perform repairs.