Operation Manual

98
outlet
The outlet should, under no circumstances, be
connected to a duct which is also being used
for other purposes.
The air can be discharged directly outside
through the wall opening, provided this is
protected by a grid to shield against rain and
leaves, etc.
The grid should not restrict the outlet hole by
more than 20%.
We advise the fitting of the widest possible
outlet duct. A smaller diameter will result in a
lower extraction capacity and a higher noise
level.
Ensure that the connections fit well.
Aluminium or plastic tape can be used to
connect the pipes.
Bends in the duct will have a negative
influence on the extracting capacity and
should therefore be avoided as much as
possible.
ATAG provides accessories for extractor
ducts of extractor hoods. A list of the product
assortment and the relevant type numbers
can be found in the model/price list.
building-in dimensions
60
650/1080
550
900
255
255
WG3..Z/WG4..Z
WG5..Z/WG6..Z
EG5..Z/EG6..Z
60
650/1080
550
1200
255
255
60
660/1100
700
1200
255
255