Operation Manual

Operating instructions ATAG E-Series
14
Adjustments
The boiler has a large number of settings options.
We advise you to contact your installer for
adjusting the boiler to your required settings.
Adjusting the flow water temperature (CH)
- Press the Mode key briefly
(from the Technical reading).
The display will show PARA .
- Press the Step key once.
The display will show 1 85 .
- Press the + or the - key to alter the adjustments,
if necessary.
- Press the Store key to confirm the setting.
The display will flash once.
- Press the Mode key briefly.
The display will show StbY for a short while and
will return to the Technical reading.
The flow water temperature that has been adjusted
only applies to the central heating and is independent of the hot water facility.