Operation Manual

EN 49
Aqua cleaning
1
Remove all accessories from the oven, including the Side
Runners (see page 57).
2
Pour approximately 400 ml (3 / 4 pint) of water onto the bottom
of the empty oven. Use normal water only, no distilled water.
3
Close the oven door.
Caution The aqua cleaning system can be switched on only
when the oven has cooled to room temperature
completely. Allow the oven to cool completely if it
does not work.
4
Turn the Divider Select Knob to aqua
clean mode.
5
After an amount of time, the heater
completes operating and its lamp remains
on.
6
When the operation is complete, the
display will blink and a beep indicates the
end.
CLEANING AND CARE