Operation Manual

EN 68
After deactivating the Aqua Cleaning
Tips
•
Take care when opening the door before the end of the aqua cleaning procedure; the water
on the bottom is hot.
•
Never leave the residual water in the oven for any length of time, for example, overnight.
•
Open the oven door and remove the remaining water with a sponge.
•
Using a detergent-soaked sponge, a soft brush or a nylon scrubber, wipe the oven interior.
Stubborn soil can be removed with a nylon scourer.
•
Lime deposits may be removed with a cloth soaked in vinegar.
•
Wipe clean with clear water and dry with a soft cloth (do not forget to wipe under the oven
door seal).
•
If the oven is heavily soiled, the procedure may be repeated after the oven has cooled.
•
If the oven is heavily soiled with grease, for example, after roasting or grilling, it is
recommend that you rub detergent into the stubborn soil before activating the oven
cleaning function.
•
After cleaning, leave the oven door ajar at a 15° angle to allow the interior enamel surface
to dry thoroughly.
USING THE AQUA CLEAN FEATURE (CONTINUED)