Operation Manual

EN 14
Setting the language and the clock
When the power is fi rst supplied to the oven, you must set the language and the time.
Turn the MULTI-FUNCTION
SELECTOR to set the language. Press
Start to confi rm.
Now you have to set the right time.
The ‘12’ will blink.
Example: to set 1:30.
Turn the MULTI-FUNCTION
SELECTOR to set the hour.
Press Next to confi rm. The ‘00’ will
blink.
Turn the MULTI-FUNCTION
SELECTOR to set theminutes. Press
Start to fi nish setting the clock.
‘30’ will stop blinking.
The display shows the time of day.
The appliance is now ready to use. If
you want to change the time later on,
you can do this by pressing the Menu
and choose ‘Time’ by turning the
MULTI-FUNCTION SELECTOR and
press the Next. Then follow step 2-6
as described on this page.
Automatic shuto (clock)
If the knobs of the oven are not operated for more than 30minutes, the display will turn o
automatically for energy saving reasons. By operating any key, the display is switched on again.
If desired, this function can be turned o (see page17; ‘Auto shuto ’).
12
34
56
BEFORE YOU BEGIN