Operation Manual

EN 43

Choose the desired mode and

function (and set the temperature if

preferred).

Press END TIME.

The current time will be shown

blinking on the DISPLAY.

Example Current time is 13:00.

The current time’s digit

“13:00” will blink.

Turn the MULTI-FUNCTION

SELECTOR to set the desired End

Time (14:00).

Example Desired time is 14:00.

Press END TIME again.

Example Current time is 13:00.

Desired end time is 14:00.

Press START to start the oven.

Cooking time “1:00” is displayed.

The oven will start promptly.

Note

1) The cooking time will count down in the time display. When the setting time has elapsed, an

audible signal sounds, “0:00” will blink in the display and the oven switches itself o .

The current time is shown in the display.

2) During cooking, you can adjust the preset cooking time for better cooking performance.

Press COOK TIME and change the time with the MULTI-FUNCTION SELECTOR.

3) The end timer can be reset in the same order as above. To cancel the programmed end

time, press END TIME and set the time to the current time.

SETTING THE END TIME