Operation Manual

EN 41
SETTING THE END TIME
1
Choose the desired mode and
function (and set the temperature if
preferred).
2
Press END TIME.
Example Current time is 13:00.
The current time’s digit “13:00”
will blink.
3
Turn the MULTI-FUNCTION
SELECTOR to set the desired End
Time (14:00).
4
Press END TIME again.
Example Current time is 13:00.
Desired end time is 14:00.
5
Automatically start after 5 seconds.
Cooking time “1:00” is displayed.
Note
1) The cooking time will count down in the time display. When the set time has elapsed, an
audible signal sounds, “0:00” will blink in the display and the oven switches itself o .
The current time is shown in the display.
2) During cooking, you can adjust the preset cooking time for better cooking performance.
Press COOK TIME and change the time with the MULTI-FUNCTION SELECTOR.
3) To cancel the programmed end time, press COOK TIME and set the time to zero with the
MULTI-FUNCTION SELECTOR.