User`s manual

Multiple handset

Push-to-talk (PTT)

Make an outgoing call during PTT

Using a cordless handset or the telephone base:

During a one-to-one PTT call, press HOME/FLASH on your handset or

press HOME on the telephone base to get a dial tone. The PTT call ends

automatically.

During a one-to-group PTT call, press HOME/FLASH on the initiating

handset, or press HOME on the telephone base. The PTT call ends

automatically and you get a dial tone.

During a one-to-group PTT call, press HOME/FLASH on any one of the

destination handsets, or press HOME on the destination telephone base.

That handset or telephone base gets a dial tone. The PTT call continues for

the rest of the PTT participants.

End or leave a PTT call

For a one-to-one PTT call, both the originating and destination devices can

end the PTT call. For one-to-group PTT calls, the initiating devices can end the

PTT call for the group of devices on that PTT call. If any one of the destination

devices leaves the PTT call, the call continues until all participants or the

initiator hangs up.

Using a cordless handset or the telephone base:

Press OFF/CANCEL or END on the handset, or press CANCEL or END on

the telephone base. The screen shows Push to talk Ended.

-OR-

Place the handset in the telephone base or charger, then the handset return

to idle mode.

NOTES: After PUSH TO TALK on the handset or PTT on the telephone base is released, the

PTT call remains open for a short time. If no one presses PUSH TO TALK on the handset or

PTT on the telephone base within 10 seconds, the PTT call ends automatically.

•