User`s manual

Telephone operation

To answer a cell call:

Press HOME, CELL 1, CELL 2 or any dialing key (0-9 or TONE ).

To end a cell call:

Press CELL 1 or CELL 2.

NOTES:

You can also use your cell phone to answer the call. If you answer with your cell phone, it

disconnects from the telephone base.

If you do not want to answer the call, press REJECT.

When you try to make a cell call but your cell phone is not connected to the base, the

telephone base displays Cellular phone not connected. Please connect to proceed. Refer to

Bluetooth connection from idle mode on page 22 and Connect/disconnect an active device

on page 23.

Call waiting on the cell line

If you subscribe to call waiting service from your cell phone service provider,

you hear a beep if someone calls while you are already on a call.

Using a cordless handset:

Press CELL 1 or CELL 2 to put your current call on hold and take the

new call.

Press CELL 1 or CELL 2 at any time to switch back and forth

between calls.

-OR-

Press SWAP to switch. To switch back, press CELL 1 or CELL 2.

Using the telephone base:

Press SWAP on the telephone base. The original call is put on hold and

you take the new call.

To switch back, press OPTION on the telephone base. Press CID or

DIR to highlight Swap Cell 1 or Swap Cell 2. Press SELECT to resume

the original call. The other incoming cell call is put on hold.

•