User`s manual

25
Bluetooth
Bluetooth setup
Replace an active device
If you already have two active devices on the device list and you want to
activate a different device, you must deactivate one of the two active devices.
To replace an active device:
Press MENU on the handset when it is not in use.
Press CID or DIR to highlight Bluetooth, then
press SELECT.
Press CID or DIR to highlight Device list, then
press SELECT.
Press CID or DIR to highlight the device you want to
activate without a prefix D1: or D2:, then press OPTION.
Press CID or DIR to highlight Connect, then press
SELECT. The handset displays Only BT devices in slot
1 or 2 can be ready for connection and then a list of
devices for deactivation.
Press CID or DIR to highlight the device to be
deactivated, then press NEXT. The handset displays
Cell Phone A is deactivated and you hear a
confirmation tone. The screen then displays
Connecting Cell Phone B to the base...
Depending on your cell phone settings, you may
need to press a key on your cell phone to confirm
the connection. When the new device is successfully
activated and connected, the handset displays
Device connected. You hear a confirmation tone.
NOTE: When connecting a Bluetooth device to the device list, all connected devices will be
temporarily disconnected until the procedure is complete. It may take up to 2 minutes to
reconnect.
1.
2.
3.
4.
5.
6.
7.
BLUETOOTH
Add device
Device list
Download dir
BACK SELECT
DEVICE LIST
D1:Cell Phone A
D2:Headset A
Cell Phone B
BACK OPTION
DEACTIVATE
D1:Cell Phone A
D2:Headset A
BACK NEXT
Connecting
Cell Phone B
to the base...
DEVICE LIST
D1:Cell Phone B
D2:Headset A
Cell Phone A
BACK OPTION